This weekend I had a little time to spend in the shop and wanted to cut a few dovetails as it has been a while. I am getting ready to start a chest of drawers project as part of the Woodwhisperer Guild summer build and will need to cut quite a few dovetails, so I decided to play around a little. Before long I ended up with a cool little box.
I started with cutting a few dovetails in some scrap oak I had laying around the shop. After I finished they fit so nice I decided to go ahead and make a box out of them. I lined the inside with cherry for the lid to sit on and also used cherry for the base and lid. The holes I drilled in the sides to show some of the cherry lining as a contrast to the oak.
The tree came from an idea that I have had for a while. I sketched the tree onto a 1/4″ piece of oak and cut it out using my scroll saw. Once the shape was cut out I used a wood carving bit on my dremel to finish the tree. After carving tree I realized that because the surface of the tree was now uneven I was going to have a problem clamping it to the lid while gluing it down. The solution I came up with was to apply the glue to the back of the tree, lay it on the lid and then cover it with plastic wrap for protection. I then placed pea gravel over the surface and set a weight on top. The pea gravel allowed the weight to have even pressure over the surface.
This was a fun little project to build and sometimes it is nice just to see where inspiration takes us.
Go to Smartblog Theme Options -> Ad Management to enter your ad code (300x250)